Item Description

For sale is my VSR Clone. The base was a JG BAR 10 and the only thing left which remains stock is the suppressor, putter barrel and the stock cylinder and cylinder head.

Lots of upgrades listed below. You will also get the stock receiver, trigger unit, spring and spring guide.

Springer Custom Works 90 degree trigger
Action Army hop unit
Panthera concave CNC nub
X-range 70 degree bucking
Rapax 2+ joule Spring
Rapax Power Rings
Stalker Spring Guide
Stalker Scorpion Piston (with all sections)
Action Army CNC receiver
Action army g-spec inner barrel
JG Bar 10 G-Spec
ASG optic 3x9
4 x Magazines
(2 x cyma, 1 x stock, 1 x Action Army)

Currently at 2.10 joules on a 0.48g so is perfectly site legal however if you want to increase or decrease this you simply either add or remove a power ring or change the piston configuration. So it's an adjustable FPS.

I've used it for 3 games and it's been flawless however sniping really isn't my thing anymore as I like to get really stuck in.

What needs doing to it - not a lot really, you could run it as it is and you'll be sweet, you will have to adjust the sight though as I do adjust it during the game to account for windage etc but it's pretty close to being spot on.

The hop may need a slight tweak as I think it's over hoping.. yes over hoping a 0.48.. the panthera nub just needs the very slightest adjustment to set the hop.

If I was to keep it, I'd change the cylinder but the bolt is relatively smooth now. Change the cylinder head because that's still stock, maybe get a TDC for it but it's just those little things. I'd probably spend more time adjusting the piston too because although it's good as it is and makes the gun quiet (I have a video which I can send) you can really perfect it's settings.

As mentioned, it's been used and I don't mess about and get into any Bush I can this has left some minor scuffs on the stock but obviously it doesn't effect how it performs.

The rail holding the sight on is a 3D printed one.. its a tiny bit wobbly but once the tape was wrapped around it, solid and still.. plus I think it looks a bit edgy with the tape. Tape has been used on the sling points too.. this was to stop the rattle sound.

One of the screws had to have a dremmel taken to it because it just rounded off, again doesn't effect it but has marked it but I guess these screws are an issue considering they sell after market ones made of better material.

Trigger is adjustable and I have it pretty light at the moment.

I shoved an old tshirt in the stock to quieten it down a bit too.. apparently it does according to reddit and the forums.

So there you have it. Pricing everything up, it's about £600 worth of gun and many hours tweaking it and upgrading it.

I can have it posted on a next day service or you are welcome to collect. If you want me to drive it to you, then some money to cover the fuel would be nice depending on where you are.

But there you go, I hope that covers everything and if you have any questions, let me know.